How to level your refrigerator?

If you have recently bought a new best refrigerator what are the first things other than putting your stuff in the refrigerator is to level it. Leveling the refrigerator probably is one of the most important steps as it can significantly affect the performance of the refrigerator. Here leveling of the refrigerator doesn’t mean that the whole unit should be completely level with the ground but rather it should be tilted a bit towards the backside

In most cases, this process is quite simple and hassle-free. Here in this article, we have produced a step-by-step guide on how to level your refrigerator.

Common problems in an improperly leveled refrigerator –

Typically all refrigerators work by pumping a special liquid also called the coolant throughout the refrigerator via the heat drain pipes. These pipes carry the heat away from the refrigerator and are cooled by this coolant. If the refrigerator is not leveled properly and is tilted to any side other than the back then the coolant is prone to pool in the drain pipes which will only make the pumps work much harder to circulate the coolant throughout the drain pipes. This results in an overall decrease in the efficiency of the refrigerator and increases energy usage. It can also break the refrigeration cycle causing frosting in the freezer.

The other common issue that you may face is leaving the refrigerator door open unintentionally. If the door does not close completely then the inner air from the refrigerator will get mixed up with the atmospheric air, slowly increasing the temperature inside the fridge. This makes the refrigerator work even harder to compensate for the temperature loss and decreases the refrigerator’s overall efficiency like the best refrigerator in India.

How to level a refrigerator properly –

Leveling a refrigerator is an easy process if you know what to do and how to do it. Leveling a refrigerator not only increases the efficiency of a refrigerator but also awards any freezer frost build-up.

Here’s how to level your refrigerator properly

● First, you need to remove the grill from the bottom of the refrigerator at the front side. The grill might be secured by some screws or release clips that you need to remove first before removing the grill. The process may vary depending upon the model of the refrigerator so if you get stuck somewhere in this step, refer to the user manual of your refrigerator.

● Once the grill is removed, you will be able to access the frontal legs of the refrigerator which either will have rotatable screws that will help you to increase or decrease the size of the legs. Some refrigerators also have height-adjustable rollers that you can use to adjust the height of the legs.

● To level the refrigerator in case of threaded legs, just rotate the leg in a clockwise direction will help to raise the height of the frontal legs. If you want to lower the height rotate the threads in an anticlockwise direction.

● If your refrigerator doesn’t have a threaded leg rather has a height-adjustable roller then you need to look for an adjustment screw located somewhere near the top of the roller. You need to rotate this adjustment screw in order to increase or decrease the leg’s height. Rotating the screw clockwise will increase the height of the leg and vice versa.

● If your refrigerator has rollers and legs make sure that you increase the height of the legs enough so that the rollers don’t touch the ground. If by doing this, the front side of the refrigerator is raised by 0.5 inches higher than the backside then you need to increase the height of the back legs to balance it.

● You might need to repeat the same process a few times until you get the leveling right. The best way to check if the leveling is right or not is by slightly opening the refrigerator door and just letting it go without pushing it. If it closes on its own without external application of force by you, then the refrigerator is completely balanced.

Generally, refrigerator manufacturers recommend keeping the frontal legs .25 to .5 inches higher than the hind legs. This height should be good enough for the refrigerator door to shut on its own.…

Read More →

How Long Do Refrigerators Last?

Refrigerators are an important part of any kitchen, but however important they might seem they won’t last forever. Every appliance has its life span which surely depends upon the appliance itself. Even the cheapest refrigerators can cost you between $350 to 1000 dollars which is a lot of money and can set you back for the whole month if you plan to buy a new refrigerator.

But how to know when you are going to need a new refrigerator or when your current refrigerator is going to give up?

In this article we are going to take a look at the most common signs of refrigerator failures and when you need to start looking for a new refrigerator.

How long will my refrigerator last?

A typical refrigerator should last you about 10 to 15 years, give or take a few years. Though mostly the lifespan of a refrigerator depends upon which category of the refrigerator it belongs to. For example, refrigerators that have a separate freezer on top or bottom of the main compartment should last you about 10 to 12 years. Also, there are refrigerators which have a freezer inbuilt into the main refrigerator compartment which lasts much less than the previous category. Beyond the mentioned period, the refrigerator loses its cooling efficiency and will work overtime to compensate for the loss which will result in high energy consumption, expensive bills and lower efficiency. If your refrigerator is in this phase currently then you probably should consider buying a new refrigerator as soon as possible.

How to improve the lifespan of a refrigerator?

As seen above, under typical conditions a refrigerator won’t last more than 15 years in any case but if you take care of it properly you can make its life span as long as up to 20 years. There are few things that you should carry out on a regular basis to ensure that your refrigerator is well maintained and working in its finest condition. Here are a few tips that can help you improve the lifespan of your refrigerator

1. Clean the condenser –

One of the most important working parts of your refrigerator is the condenser coil and the metal tubings surrounding it. Mostly found below or behind the refrigerator’s back, the condenser coil helps to liquefy the vaporized refrigerant from the unit’s compressor to help release hot air from within the refrigerator and pass it on to its surroundings.

This helps to lower the temperature inside the refrigerator and keeps it cool. In case your condenser coils are not working properly which is mostly caused because of dirt and debris getting stuck into the coils, then it can stop working properly resulting in increasing temperatures inside the fridge that in turn spoils your food. Care should be taken that these coils and condenser tubes should be cleaned on a regular basis at least once every two months and if you live in an environment with higher dust amounts you should consider cleaning it more often.

2. Lubricate-

Refrigerators tend to keep the insides of a refrigerator cool by making insulation which keeps hot air outside of the refrigerator and cool air inside. For this purpose, a tight seal should be established between the inner parts of the refrigerator and the outer surroundings. This work is carried out by the seal applied inside of the door which is also called as the door gasket. The gasket helps to create insulation which seals the interiors with cold air.

Over time the rubber in the door gasket gets weakened and produces cracks which can lead to unwanted breaks in the seal causing the air from within the refrigerator to escape. This makes the interiors of the refrigerator warm over time decreasing the efficiency of the compressor and the condenser. The best way to prevent this from happening is to regularly lubricate the door gasket and ensure that there are no cracks or tears in the gasket.

3. Clean the vents –

You might have noticed small vents located on the inside of fridge walls and on the roof of the freezer, these vents help in circulation of cold air throughout the refrigerator. If these air vents get blocked then cold air may not be able to circulate inside of your refrigerator resulting in increasing temperature and ultimately spoiling your food.

So make sure that you clean these events on a regular basis at least once every two months. Also, make sure that you don’t place food items too close to these vents and block them.

4. Regularly troubleshooting small problems –

Minor fridge malfunctions occur all the time in your refrigerator but if you take care of them in time then you might be able to avoid major faults. Some common problems and their solutions have been listed below –

● If you ever see a puddle of water forming below your refrigerator or water leaking out of your refrigerator then it might be because of a faulty drain pipe. It is mostly caused when there is a crack or breakage in the water drain pipe that carries water from the dispenser to the cooling unit. To take care of this problem just unplug your refrigerator and check for leakages and cracks in the drain pipe. Before doing anything to the drain pipe make sure that you shut off the valve located near the sink under the fridge. If the pipe is beyond repair then replace it with a new one and make sure that you don’t leave any loose ends.

● If you notice that your refrigerator is making too much noise such as a motor whirling around, then probably it is because of your cooling fan located near the condenser coils. To fix this issue access the condenser coil area located below your refrigerator and check for damage in the fan blades or the motor. If the fan blades are worn out make sure to replace them with new ones.

● If you ever get to the ice maker trying to get out some ice cubes for your drink and find that there is no ice in the ice maker even though you haven’t altered any settings then it is probably because of the fill pipe that supplies water to the ice maker is clogged with ice. To solve this issue just turn off your refrigerator for an hour or two until the ice in the fill pipe starts to melt away. Or if you are in a hurry then just use a hot air blower onto the pipe and melt all the ice away with the hot air.

5. Know when to replace –

Though the above-given tips will help you to increase the lifespan of your refrigerator, but there comes a time when the refrigerator cannot be repaired anymore and needs to be replaced. Here are a few signs that show that your refrigerator needs to be replaced –

● The back side of your refrigerator gets constantly hot generating an excessive amount of heat.

● Your food is no longer staying good for as long as it used to earlier.

● Frequent condensation on the insides of the fridge even when your door gasket is in pretty good condition.

● You frequently find a thick layer of frost on your frozen food items whenever you retrieve them from the freezer.

● Your electricity bill shooting to the sky even though when you are not using any electricity heavy appliances.

If you find yourself facing any of these above-given signs with your refrigerator then probably the time has come to replace it with the new one.…

Read More →