How to level your refrigerator?

If you have recently bought a new best refrigerator what are the first things other than putting your stuff in the refrigerator is to level it. Leveling the refrigerator probably is one of the most important steps as it can significantly affect the performance of the refrigerator. Here leveling of the refrigerator doesn’t mean that the whole unit should be completely level with the ground but rather it should be tilted a bit towards the backside

In most cases, this process is quite simple and hassle-free. Here in this article, we have produced a step-by-step guide on how to level your refrigerator.

Common problems in an improperly leveled refrigerator –

Typically all refrigerators work by pumping a special liquid also called the coolant throughout the refrigerator via the heat drain pipes. These pipes carry the heat away from the refrigerator and are cooled by this coolant. If the refrigerator is not leveled properly and is tilted to any side other than the back then the coolant is prone to pool in the drain pipes which will only make the pumps work much harder to circulate the coolant throughout the drain pipes. This results in an overall decrease in the efficiency of the refrigerator and increases energy usage. It can also break the refrigeration cycle causing frosting in the freezer.

The other common issue that you may face is leaving the refrigerator door open unintentionally. If the door does not close completely then the inner air from the refrigerator will get mixed up with the atmospheric air, slowly increasing the temperature inside the fridge. This makes the refrigerator work even harder to compensate for the temperature loss and decreases the refrigerator’s overall efficiency like the best refrigerator in India.

How to level a refrigerator properly –

Leveling a refrigerator is an easy process if you know what to do and how to do it. Leveling a refrigerator not only increases the efficiency of a refrigerator but also awards any freezer frost build-up.

Here’s how to level your refrigerator properly

● First, you need to remove the grill from the bottom of the refrigerator at the front side. The grill might be secured by some screws or release clips that you need to remove first before removing the grill. The process may vary depending upon the model of the refrigerator so if you get stuck somewhere in this step, refer to the user manual of your refrigerator.

● Once the grill is removed, you will be able to access the frontal legs of the refrigerator which either will have rotatable screws that will help you to increase or decrease the size of the legs. Some refrigerators also have height-adjustable rollers that you can use to adjust the height of the legs.

● To level the refrigerator in case of threaded legs, just rotate the leg in a clockwise direction will help to raise the height of the frontal legs. If you want to lower the height rotate the threads in an anticlockwise direction.

● If your refrigerator doesn’t have a threaded leg rather has a height-adjustable roller then you need to look for an adjustment screw located somewhere near the top of the roller. You need to rotate this adjustment screw in order to increase or decrease the leg’s height. Rotating the screw clockwise will increase the height of the leg and vice versa.

● If your refrigerator has rollers and legs make sure that you increase the height of the legs enough so that the rollers don’t touch the ground. If by doing this, the front side of the refrigerator is raised by 0.5 inches higher than the backside then you need to increase the height of the back legs to balance it.

● You might need to repeat the same process a few times until you get the leveling right. The best way to check if the leveling is right or not is by slightly opening the refrigerator door and just letting it go without pushing it. If it closes on its own without external application of force by you, then the refrigerator is completely balanced.

Generally, refrigerator manufacturers recommend keeping the frontal legs .25 to .5 inches higher than the hind legs. This height should be good enough for the refrigerator door to shut on its own.